New for Austin Amusements is our CNC Counter Top Arcade machine Flat Packs.

These are brand new at Austin Amusements so please contact us for more details.

Our flat packs are professionally CNC (Kitchen grade MDF, not chip board like othjer sellers)  cut right here in Australian. Designed to easily slot together for quick assemble.

Watch our youtube video, our flat packs can be assembled in no time at all.

Three ways to assemble these cabinets:

1) The cabinet comes with pre-cut locator tabs which slot in place and only requires glue and a large pair of clamps to hold the machine together tightly while the glue is drying (the pre-cut tabs are a tight fit and the cabinet stays together without glue but it would not be recommended to leave it this way).

If you don't have clamps, no problem.

2) You can also add glue, place all pieces together with glue in the slots. Add weight to the top piece of the cabinet and let the glue dry. Once the glue is dry, add small L type brackets. Screw the brackets in place for extra support and to firmly hold the panels together. Not every piece will require a bracket, maybe 3-4 on each side to hold the pieces tightly together.

3) The cabinet can also be screw together from the outside and you can counter sink the screws. Fill the screw holes with bog and sand flat. Decals can then be used to cover counter sunk screws. If you don't wish to apply decals and are happy with a white cabinet buy screws with white caps. Once the screws are in place put the cap on and you are done.

Our flat pack is a two player counter top arcade machine with 6 buttons holes per player plus holes for the player 1 and 2 start buttons and 2 additional holes for credit buttons.

*Please not when the machines are routed to fit t-moulding we recommend using 18mm or 17.5mm lipped t-moulding. There is not guarantee the routing will be 100% centre. Using 16mm t-moulding requires the slot to be 100% centre to cover the 16mm wood. Although we try our best to centre the routing there is always a chance for it to be off centre. This is why we recommend 17.5 lipped t-moulding or 18mm. It your adding decals the t-moulding also helps to cover this as well.

Screen:

The machine will fit a 22in screen, but you can use 20-22in if required.

The screen hole size is 503mm wide and 262mm high, but this piece of wood does not need to be used if you have a larger screen and wish to modify the cabinet a little. You can purchase a piece of perspex as you screen cover to fit a wider screen. The maximum size is 510mm by 310mm.

The machine is designed to be assembled easily. The screen can be installed and put in place still on its stand, or you can add and a bracket to mount the screen on.

Whats our price?

Contact Austin Amusements and we can work you out a price if what you need is not listed below.

Pack 1)

DIY flat pack - wood only 

Wood is routed for t-moulding.

Pack2)

DIY flat pack - wood and L brackets  

Wood is routed for t-moulding.

Pack 3)

DIY flat pack - wood, perspex header, routed to fit t-moulding (2.38mm router bit), 10 x L brackets 

Pack 4) COMPLETE PACK: including White Cabinet kit (not assembled), routed for t-moulding, perspex header, with refurbished 22in screen (1 year warranty on the screen) and standard 5000 in 1 arcade game, joysticks, buttons pack (everything you need to build the machine yourself, minus glue and screws), prices start from $595 (Decals extra, Add $150 for our standard decals or we can quote for custom decals).

Don't have the time to build your own counter top arcade machine? 

Pack 5) Assembled white empty cabinet (wood only), fully assembled starts from $360 each

Pack 6) Assembled cabinet with standard decals, refurbished 22in screen (1 year warranty on the screen), standard arcade pack with 5000 in 1 JAMMA board and perspex header - $950 Each

Contact Austin Amusements with your requirements and we will quote a price.

*Assemble does require a little work but it is not that hard. We feel it is VERY easy to assemble, but if you have very limited woodworking skills and no access to a file, rubber mallet, clamps and glue, it may not be for you. You will require a few simple tools to put the machine together. In my experience an IKEA flat pack is harder to assemble!

* Delivery prices:

Please Contact Austin Amusements for a delivery price or buy the flat pack and select 'pick up' as the shipping method. We will then get a quote for the deliver cost to your address and invoice you separately for the delivery price. 

Delivery via Couriers Please to most metro and some country post codes:

NSW: $75

VIC & QLD : $125

ACT: $125

SA & WA: $165

TAS: $165

NT: Email Post Code for price

PICK UP AT KINGSGROVE NSW